alumina ceramic lining tile

alumina ceramic lining tile

Alumina Ceramic Tile is  high wear resistance, acid and alkli resistance, effectively prolong the service life of equipment and considered to be the best choice of anti-wearing and anti-corrosion material; Wear resistant ceramic is 266 times than that of special manganese, 171.5 times to high chrome cast iron; Hardness is much higher than that of wear-resistant steel and stainless steel.

Application for this kind wear resistant lining: Oil, mining, steel and power industry.

Size Available(mm) for this kind abrasion resistant lining: Length x width x height
10 * 10 * 5/10
17.5 * 17.5 * 4/5/6/7
120 * 80 * 10/12.7/20
110 * 37/34 * 12
130 * 50/47 *12
150 * 60/57 * 12/10
150 * 100 * 50/25.4/12.7/6
100 * 100/50 * 25.4
Hextile: Customized
Trapezoidal Tile: Customized
Heatrotypic Tile: Customized.

Superior wear life in alumina can be attributed to these basic characteristics:

1 Individual alumina grains should be a fine size.

2 Have an even distribution throughout the body.

3 Glass matrix will have no porosity or crystallization.

4 Full adhesion to each alumina grain within the tile.

5 Tile density in relation to AL2O3 content.

6 Matrix components used and mix ratio in combination with firing temperature